What size hole should be drilled into the wall to supply the shower spa with water?
A 0.25″ hole should be drilled through the wall surface. Please refer to the installation instructions for more detailed information.
A 0.25″ hole should be drilled through the wall surface. Please refer to the installation instructions for more detailed information.
The showerhead pivots on a ball, allowing for about 20 degrees of movement in any direction.
We do not recommend any type of modification to our shower systems and/or shower panels. Not only will you be voiding any warranty with us, but there is no guarantee it will work.
The body jets can be angled for greater reach. Each body jet can also be turned on/off by twisting jet.
You need at least 40-45 PSI of water pressure
Pulse only makes Shower Systems and Shower panels, they do not manufacture accessories or individual faucets, as such the Mojave is the only fixture on our site we offer from this collection.
This unit has a convenient glass shelf.
This shower does not have a thermostatic valve, it is equipped with a pressure balance valve.
The width from side to side is 11 inches. Please refer to the spec sheets for other important measurements.
The shower spa does not feature simultaneous body jets and overhead.