Bonzai – 1017
Designed to utilize your existing valve & connect via the old showerarm/head location; adding a complete shower system solution has never been easier! This product cannot be shipped to CA, CO and New York City, NY due to their 1.8 gallons per minute flow restriction.
|Dimensions||43 x 18 x 7 in|
DEPTH: 17.375 inches, HEIGHT: 50.5 inches, WEIGHT: 14 lbs, WIDTH: 4 inches
8 inch “Rain” style/ABS Construction
3 Functions (Massage/Spray/Cascade)/ABS Construction
3 Single Function/ABS Construction
Full foam insert/2-layer corrugated cardboard
The body jets can be turned on and off. However, the body sprays cannot be individually operated, all three must either be on or off.
The Bonzai can run ANY 2 functions at the same time.
The handshower can not be adjusted, it is at a fixed height.
The Bonzai is equipped with an 18″ supply line hose that allows positioning of product based on shower layout. The water supply inlet is about 34″ from the bottom of the unit.
The showerhead sits at about 21 inches from the wall. Refer to the Bonzai spec sheet for other important measurements.
The Bonzai is equipped with a 5-function handshower. Functions are as follows: Jet mist, Rain fall mist, Wide, Wide and bubble.
This is standard, 59-inch non-marring hose.